搅拌一体机液压泵使用要注意什么问题?
What problems should be paid attention to when using the hydraulic pump of the mixer?
搅拌一体机的正常运行是通过液压系统执行的。液压泵和马达也是液压系统特别是液压泵的重要组件。在下一个小系列中,我们将介绍使用液压泵时的一些预防措施。
The normal operation of the mixer is carried out by hydraulic system. Hydraulic pump and motor are also important components of hydraulic system, especially hydraulic pump. In the next small series, we will introduce some precautions when using hydraulic pumps.
使用前,请确保液压泵就位,并拧紧螺钉,并在必要时安装联轴器。接下来,检查泵体是否充满了符合标签要求的液压油。仔细检查泵的转向是否与进口和出口相匹配,以及液压系统中的阀是否已调节压力值。
Before use, make sure that the hydraulic pump is in place, tighten the screws, and install the coupling if necessary. Next, check that the pump body is filled with hydraulic oil that meets the label requirements. Carefully check that the steering of the pump matches the inlet and outlet, and that the relief valve in the hydraulic system is adjusted to the pressure value.
使用搅拌一体机的液压泵时,请勿以大速度启动。在连续进行空载操作之前,必须在系统卸载时将原动机开关打开几次。目标是从管道中尽可能多的空气。运行1-2分钟后,没有出现异常现象,负载逐渐增加。确保在加载过程中没有异常的振动,噪音或泄漏。否则,请停止检查并立即排除故障。
Do not use hydraulic mixer at high speed. Before continuous no-load operation, the prime mover switch must be turned on several times when the system is unloaded. The goal is to remove as much air as possible from the pipe. After running for 2 minutes, the load did not increase gradually. Make sure there are no abnormal vibration, noise or leakage during loading. Otherwise, please stop the inspection and correct the fault immediately.
长时间使用后,请注意更换液压油并确保泵正在运行。
After using for a long time, please pay attention to change the hydraulic oil and make sure the pump is running.
搅拌一体机液压泵使用要注意的事情了解就是这些,你学会了吗?
Mixing machine hydraulic pump use should pay attention to things to understand these are, you learned?