对于自动上料搅拌一体机,发动机的使用仍然非常重要,因此在建筑中使用发动机时必须格外小心。让我告诉您一些正确的引擎维护方法。
For the automatic feeding mixer, the use of the engine is still very important, so we must be very careful when using the engine in the building. Let me tell you some correct engine maintenance methods.
1.,用塑料薄膜覆盖混凝土搅拌机的设备,然后用半湿毛巾覆盖薄膜的顶部,以防止高压水流入分配器,从而难以启动。混合器。
1. First, cover the equipment of the concrete mixer with plastic film, and then cover the top of the film with a semi wet towel to prevent high-pressure water from flowing into the distributor, making it difficult to start. Mixer.
2.用高压水枪从顶部到底部自动上料搅拌一体机侧面的污垢。
2. Use a high-pressure water gun to remove the dirt on the side of the automatic feeding mixer from the top to the bottom.
3.在湿式搅拌机发动机和机舱周围均匀直接地喷洒混凝土搅拌机发动机外部清洁剂。
3. Spray the external cleaner of concrete mixer engine evenly and directly around the wet mixer engine and engine room.
4.冲洗3分钟后,使用纤维刷清洁可能到达发动机舱的所有部件。
4. After washing for 3 minutes, use a fiber brush to clean all parts that may reach the engine compartment.
5.用高压水枪快速洗去污垢。
5. Use a high-pressure water gun to quickly wash away the dirt.
6.接下来,在发动机表面上喷涂自动上料搅拌一体机发动机的外部清洁剂。操作步骤与上述相同。该循环一直进行到清洁混凝土搅拌机发动机的外部为止。
6. Next, spray the external cleaner of the automatic feeding mixer engine on the engine surface. The operation steps are the same as above. This cycle continues until the outside of the concrete mixer engine is cleaned.
自动上料搅拌一体机设备在正常使用期间通常在3个位置使用,在维护期间通常在7个位置使用。只有这样,才能长时间保持搅拌机设备的各种运行性能。有必要对混合机设备发动机的保养知识有详细的了解,并在实际操作中根据正确的操作方法进行合理的保养。
The automatic feeding mixing machine is usually used in 3 positions during normal use and 7 positions during maintenance. Only in this way, can we keep all kinds of operation performance of mixer equipment for a long time. It is necessary to have a detailed understanding of the maintenance knowledge of mixer equipment engine, and carry out reasonable maintenance according to the correct operation method in actual operation.