自动搅拌一体车的关键机械部件检查方法有哪些？_公司新闻_新闻资讯_自动搅拌一体车_自动搅拌一体机

站内搜索

新闻资讯

公司新闻行业动态

热点

自动上料平口搅拌机多种方量可供选择

2022-12-23

混凝土自动上料搅拌车的功能有哪些？

2022-12-19

混凝土自动拌料车移动式可自行走户外施工

2022-12-16

自上料搅拌车企业这么多，买车的时候应该看哪方面？

2022-12-12

关于山汽

联系人：刘老师

电话：400-879-1999

公司：山东山汽工程机械（集团）有限公司

地址：山东省莱州市206国道与308省道交叉口东南50米

自动搅拌一体车的关键机械部件检查方法有哪些？

所属分类：公司新闻发布时间：2021-03-16 来源：http://www.shanqijituan.cn/ 浏览量：0

为了使小型自动搅拌车的使用寿命延长和施工生产，对搅拌拖泵其定期进行检查和维护是非常必要的，尤其是对自动搅拌一体车一些关键部位的检查，山汽搅拌车小编了解到其具体如下：

In order to prolong the service life of the small-sized automatic mixer and ensure the safe construction and production, it is very necessary to regularly inspect and maintain the mixing tractor pump, especially for the inspection of some key parts of the automatic mixer truck

自动搅拌一体车部位一：液压系统

Part 1 of automatic mixer truck: hydraulic system

检查步骤：搅拌拖泵液压系统的检查包含以下4个方面：1、检查油箱的油位、油质和油温，确保其数值符合要求；2、液压油泵、油马达的压力、流量、噪音、温升均应在正常范围内；3、液压系统所有阀件、蓄能器、压力表等均应表现良好；4、液压管路连接应相当牢固，不会出现外泄漏。

Inspection steps: the inspection of the hydraulic system of the mixing pump includes the following four aspects: 1. Check the oil level, oil quality and oil temperature of the oil tank to ensure that their values meet the requirements; 2. The pressure, flow, noise and temperature rise of the hydraulic pump and oil motor should be within the normal range; 3. All valves, accumulators and pressure gauges of the hydraulic system should perform well; 4. The hydraulic pipeline connection should be equal It is firm and will not leak out.

自动搅拌一体车部位二、电气设备

Automatic mixer truck part II, electrical equipment

检查步骤：电气设备的检查主要集中在以下五个方面：1、检查电动机的电流、温升，这些数值应在规定范围内。2、仪表、指示灯等各操作件的工作应表现良好；3、应该按规定的顺序进行操作，避免电气设备带负荷启动；4、保持电气设备的清洁和干燥；5、确保电缆及遥控线不受任何损伤。

Inspection steps: the inspection of electrical equipment mainly focuses on the following five aspects: 1. Check the current and temperature rise of the motor, and these values should be within the specified range. 2. Instruments, indicator lights and other operating parts should work well; 3. The operation should be carried out according to the specified sequence to avoid the electrical equipment starting with load; 4. Keep the electrical equipment clean and dry; 5. Ensure that the cable and remote control line are not damaged.

自动搅拌一体车部位三、输送管道

Part of automatic mixer truck III. conveying pipeline

查看过程：运送管道的查看包括以下2个方面：1、管道接头应该十分结实而且密闭，如发现有漏水漏浆状况，则应该及时拆开进行查看处理；2、查看管道的支承与固定状况，并及时进行维护。

Inspection process: the inspection of the transportation pipeline includes the following two aspects: 1. The pipe joint should be very solid and airtight. If there is water leakage and slurry leakage, it should be disassembled in time for inspection and treatment; 2. Check the support and fixation of the pipeline, and carry out maintenance in time.

自动搅拌一体车运送一体机为一种常用设备，操作前的查看适当重要，它不仅能够有用削减混凝土搅拌拖泵的毛病，避免建筑施工中意外的发生，同时还能延长混凝土搅拌拖泵的使用寿命，因此各操作手均应重视！

Automatic mixer truck transporter is a kind of common equipment. It is important to check before operation. It can not only effectively reduce the problems of concrete mixing pump, avoid accidents in construction, but also extend the service life of concrete mixing pump. Therefore, all operators should pay attention to it!

上一页：多功能搅拌车如何防止水箱粘在一起？下一页：怎么恢复多功能搅拌车的驱动使用？

热门产品 / HOT PRODUCT