The optional automatic mixing machine mainly includes power take-off, front and rear supports of mixing drum, imported reducer, hydraulic system, mixing drum, operating mechanism, cleaning system, etc. The working principle of the automatic mixing machine is: take out the power of the car chassis through the power take-off device, drive the variable displacement pump of the hydraulic system, convert the mechanical energy into hydraulic energy and transfer it to the quantitative motor, the motor drives the reducer, and the reducer drives the mixing device to mix the concrete.
Optional automatic mixing machine is a new product which is based on years of mechanical design, manufacturing and welding experience, fully digesting and absorbing the advanced manufacturing technology of domestic and foreign automatic feeding mixing truck manufacturers, and passing hundreds of tests on feeding and discharging speed, discharging rate, mixing efficiency, twisting elasticity and driving performance. It is a commercial coagulation machine It is an ideal equipment for soil transportation.
Automatic mixing machine system description mixing drum: the mixing drum used in this model is a common structure. The mixing drum adopts pear shaped structure, and its cleaning water and mixing water added as needed during transportation are injected into the drum from the feeding port of the mixing drum head.
Transmission system: the mixing drum is driven by the engine as the power source, and the power is taken by the power take-off at the rear end of the engine, which is transmitted to the variable plunger hydraulic pump through the transmission shaft, and then driven by the quantitative plunger oil motor and the reducer to rotate the mixing drum.
The feeding and discharging system (loading and unloading mechanism) of the mixing drum is an important device to assist the mixing drum.
Control system: it is the control part of the whole automatic feeding mixer. There is an I-shaped slot on the control panel, which is the activity space of the control lever. And there is a limit hole on the slot in the back half, which is used to fix the position of the control lever. The control system controls the forward, reverse and rotational speed of the mixing drum through the left and right control levers at the rear of the car, so as to complete the feeding and discharging and mixing action.
Water supply system: the water supply system of automatic mixing machine is mainly used to clean the mixing device. There are two types of water supply system, one is centrifugal pump water supply system, the other is pressure tank water supply system.