介绍自动上料搅拌车的一些特征_ 行业动态_新闻资讯_自动搅拌一体车_自动搅拌一体机

站内搜索

新闻资讯

公司新闻行业动态

热点

自动上料平口搅拌机多种方量可供选择

2022-12-23

混凝土自动上料搅拌车的功能有哪些？

2022-12-19

混凝土自动拌料车移动式可自行走户外施工

2022-12-16

自上料搅拌车企业这么多，买车的时候应该看哪方面？

2022-12-12

关于山汽

联系人：刘老师

电话：400-879-1999

公司：山东山汽工程机械（集团）有限公司

地址：山东省莱州市206国道与308省道交叉口东南50米

介绍自动上料搅拌车的一些特征

所属分类：行业动态发布时间：2022-09-19 来源：http://www.shanqijituan.cn/ 浏览量：0

大部分人可能对于自动上料搅拌车的相关知识不太了解，自动上料搅拌车主要结构由是行走底盘、发动机、液力变矩器、前后双驱桥、上料装置、进料斗、卸料斗、加长卸料斗、机架、搅拌筒、搅拌专用减速机、液压系统、电控系统、自动上水系统等组成。在这里小编就详细的给大家介绍一下自动上料搅拌车的一些特征，具体的特征如下：

Most people may not know much about the automatic feeding mixer. The automatic feeding mixer is mainly composed of the walking chassis, engine, hydraulic torque converter, front and rear double drive axles, feeding device, feed hopper, discharge hopper, extended discharge hopper, frame, mixing cylinder, special mixer reducer, hydraulic system, electric control system, automatic water feeding system, etc. Here, I will introduce some features of the automatic feeding mixer in detail. The specific features are as follows:

1.搅拌车搅拌筒的旋转由液压马达通过专用行星减速机带动，行星减速机的输出轴可以实现一定角度的摆动，以满足恶劣路况下搅拌筒的跳动。

1. The rotation of the mixing drum of the mixer truck is driven by the hydraulic motor through the special planetary reducer. The output shaft of the planetary reducer can swing at a certain angle to meet the beating of the mixing drum under bad road conditions.

2.液压系统采用恒功率变量柱塞泵，减少发动机的功率损耗。

2. The hydraulic system adopts constant power variable piston pump to reduce the power loss of the engine.

3.进水系统可根据计量设定实现自动进水。

3. The water inlet system can automatically feed water according to the metering settings.

4.干料上料，按照设计好的配比由铲臂、动臂缸、定量的料斗自动上料。

4. The dry material is automatically fed by the shovel arm, boom cylinder and fixed hopper according to the designed proportion.

5.自动上料搅拌车搅拌筒内壁上设置双螺旋形叶片，正向旋转为进料、混凝土搅拌；反向旋转，在螺旋叶片的推动下、混凝土由出料口出料。

5. Double spiral blades are set on the inner wall of the mixing drum of the automatic feeding mixer, and the positive rotation is for feeding and concrete mixing; Reverse rotation, the concrete is discharged from the outlet under the push of the spiral blade.

6.行走系统由发动机通过液力变矩器、前后传动轴到前后桥。本发明采用前后双桥驱动形式。采用液力变矩器减少对发动机的冲击、延长了发动机的寿命。

6. The traveling system is from the engine to the front and rear axles through the hydraulic torque converter, front and rear transmission shafts. The invention adopts a front and rear double axle drive form. The hydraulic torque converter is used to reduce the impact on the engine and prolong the service life of the engine.

通过以上六点特征的介绍，希望能够对大家有所帮助，如果还有不明白的地方欢迎与我们取得联系！

Through the introduction of the above six features, I hope it can be helpful to everyone. If there is anything you don't understand, please contact us!

上一页：混凝土自动上料搅拌车维护保养秘诀下一页：如何检查混凝土自动搅拌车的抱死系统？

热门产品 / HOT PRODUCT