欢迎光临山汽集团官方网站!

400-879-1999

点击拨打服务热线:400-879-1999
您现在所在的位置: 首页> 新闻资讯 > 公司新闻 >
站内搜索
关于山汽

联系人:刘老师

电话:400-879-1999

公司:山东山汽工程机械(集团)有限公司

地址:山东省莱州市206国道与308省道交叉口东南50米

多功能搅拌车减震器怎么样保养?

所属分类:公司新闻 发布时间:2020-06-22 来源:http://www.shanqijituan.cn/ 浏览量:18

多功能搅拌车的减震器失效或者出现问题,应首先查看减震器是否有漏油现象,用力按下保险杠,然后松开,假如搅拌车有两到三次的腾跃,就说明减震器是好的。
If the shock absorber of the multi-functional mixer fails or has problems, first check whether the shock absorber has oil leakage, press the bumper firmly, and then release it. If the mixer has two or three jumps, it means that the shock absorber is good.
多功能搅拌车在缓慢行驶中紧急制动,此时如果车辆的振动比较厉害,就说明减震器有问题,需要拆下减震器将其直立,并把下端衔接环夹在台钳上,用力拉压减震杆数次,此时应有稳定的阻力,往上拉的阻力应大于向下的阻力,如果阻力不稳定或无阻力,可能是减震器内部缺油或阀门零件损坏,应终止修复或更换零件,并应立即送去维修。
In case of emergency braking during slow driving of multi-functional mixer, if the vibration of the vehicle is severe, it means that there is a problem with the shock absorber. It is necessary to remove the shock absorber to stand it upright, clamp the lower connecting ring on the vise, and pull and press the shock absorber several times with force. At this time, there should be stable resistance. The resistance to pull up should be greater than that to pull down. If the resistance is not stable or there is no resistance, it may be In case of lack of oil in the shock absorber or damage of valve parts, the repair or replacement of parts shall be terminated and the parts shall be sent for repair immediately.
多功能搅拌车减震器漏油一般是以下几个原因:
The oil leakage of the shock absorber of the multi-functional mixer is generally caused by the following reasons:
1. 减震器内部的清洁度不够好,有焊渣、铁屑等杂物导致油封磨损。
1. The internal cleanliness of the shock absorber is not good enough. There are welding slag, iron chips and other sundries that cause the oil seal to wear.
 
 
2. 减震器的工作条件比较恶劣,外部的泥沙等杂物进入油封,导致其磨损漏油。
2. The working condition of the shock absorber is relatively poor, and foreign matters such as external sediment enter into the oil seal, resulting in its wear and oil leakage.
3. 减震器油封的唇口老化,失去了密封的功能。
3. The lip of the oil seal of the shock absorber is aged and has lost the function of sealing.
4. 可能是在喷底盘装甲的时候,减震器没有遮挡好,装甲附在减震器活塞杆上导致油封磨损而漏油。
4. It may be that the shock absorber is not well covered when spraying chassis armor, and the armor is attached to the piston rod of the shock absorber, which causes the oil seal to wear and leak.
5. 控制活塞运动的支杆需要在金属管的一端延长出来,所以这个部位必须得密封严密,一般的漏油都和密封不严有直接关系的。
5. The strut to control the movement of the piston needs to be extended at one end of the metal pipe, so this part must be sealed tightly. The general oil leakage is directly related to the loose sealing.
 一般搅拌车的液压的减震器漏油就说明它的使用年限已到。
6. The oil leakage of the hydraulic shock absorber of the general mixer indicates that its service life has reached.
多功能搅拌车底盘的减震器是非常重要的,很多人在做保养的时候都容易忽略它,希望看了这篇文章,大家能够对减震器引起重视。我公司是专业生产搅拌车厂家,欢迎来电咨询搅拌车价格,多功能搅拌车的官网http://www.shanqijituan.cn
The shock absorber of the multi-functional mixer chassis is very important. Many people tend to ignore it when they do maintenance. I hope you can pay attention to the shock absorber after reading this article. Our company is a professional manufacturer of mixer truck. Welcome to inquire about the price of mixer truck and the official website of multifunctional mixer truck http://www.shanqijituan.cn
热门产品 / HOT PRODUCT
2方平口搅拌车
推荐产品

2方平口搅拌车

倾翻上抓
推荐产品

倾翻上抓

3.5吨B款后尾
推荐产品

3.5吨B款后尾

2方后置驾驶室自动搅拌一体车
推荐产品

2方后置驾驶室自动搅拌一体车

6.5方系列搅拌车
推荐产品

6.5方系列搅拌车

3.5方B款自动搅拌一体车
推荐产品

3.5方B款自动搅拌一体车

棉花叉
推荐产品

棉花叉

5.5方自动搅拌一体机
推荐产品

5.5方自动搅拌一体机

3.5方A款自动搅拌一体机
推荐产品

3.5方A款自动搅拌一体机

4吨A正侧
推荐产品

4吨A正侧

4吨C后侧
推荐产品

4吨C后侧

3.5方A款系列搅拌车
推荐产品

3.5方A款系列搅拌车

3.5方D款搅拌车
推荐产品

3.5方D款搅拌车

4吨A后尾
推荐产品

4吨A后尾

2.6方自动搅拌一体机
推荐产品

2.6方自动搅拌一体机

4方同步旋转搅拌车
推荐产品

4方同步旋转搅拌车

4.0方自动搅拌一体车
推荐产品

4.0方自动搅拌一体车

3.5方平头搅拌车
推荐产品

3.5方平头搅拌车

4吨B斜前
推荐产品

4吨B斜前

4吨B后尾
推荐产品

4吨B后尾

首页 产品 电话 置顶