自动搅拌一体车的筒体直径有什么要点？_ 行业动态_新闻资讯_自动搅拌一体车_自动搅拌一体机

站内搜索

新闻资讯

公司新闻行业动态

热点

自动上料平口搅拌机多种方量可供选择

2022-12-23

混凝土自动上料搅拌车的功能有哪些？

2022-12-19

混凝土自动拌料车移动式可自行走户外施工

2022-12-16

自上料搅拌车企业这么多，买车的时候应该看哪方面？

2022-12-12

关于山汽

联系人：刘老师

电话：400-879-1999

公司：山东山汽工程机械（集团）有限公司

地址：山东省莱州市206国道与308省道交叉口东南50米

自动搅拌一体车的筒体直径有什么要点？

所属分类：行业动态发布时间：2020-12-23 来源：http://www.shanqijituan.cn/ 浏览量：0

筒体直径选择必须要考虑到，筒体倾斜角的大小，这也是个关重要的参数之一，因为倾斜角决定的筒体的位置，进而影响整个车的，如果不合理，那么侧翻也就很容易发生。如果倾斜角过大，而筒直径不相对减小的话那么就容易侧翻。

The selection of the cylinder diameter must take into account the size of the cylinder tilt angle, which is also one of the most important parameters, because the tilt angle determines the position of the center of gravity of the cylinder, and then affects the center of gravity of the whole car. If the center of gravity is unreasonable, then rollover is easy to occur. If the inclination angle is too large and the diameter of the cylinder is not reduced, it is easy to roll over.

我们需要看一下自动搅拌一体车所使用的地段，不同的地段也是需要配备不一样的搅拌罐的。地势平坦的罐可以做的容量相对大一点，筒直径可以相对大一些，地势相对复杂的要做的筒直径相对小一些，这样是为了让自动上料搅拌车更加的稳定，充分保障驾驶员的，提高环境适应能力。

We need to take a look at the area used by the automatic mixer. Different sections also need to be equipped with different mixing tanks. The tank with flat terrain can have larger capacity, larger diameter and smaller diameter. This is to make the automatic feeding mixer more stable, fully guarantee the safety of drivers and improve the adaptability to the environment.

对于销往世界各地的自动上料搅拌车来说，我们做车之前都会对该地区的路况进行系统分析，进而得出结论开始做车。

For the automatic loading mixer which is sold all over the world, we will make a systematic analysis of the road conditions in the region before we make the car, and then draw a conclusion to start the car.

自动搅拌一体车是由一系列精密的系统构成。所以说，各个环节之间是相互制约，相互合作共同完成搅拌车的正常运作。因此，我们要看一下底盘的配置，主要看底盘的动力、外形尺寸、车头质量等一系列参数，这些参数就像人的形体，而搅拌罐就像是人的衣服。

The automatic mixer truck is composed of a series of precise systems. Therefore, each link is mutual restriction and cooperation to complete the normal operation of the mixer. Therefore, we should take a look at the configuration of the chassis. It mainly depends on a series of parameters, such as the power of the chassis, the overall dimensions and the mass of the front of the vehicle. These parameters are like the body of a person, while the mixing tank is like a person's clothes.

上一页：自动搅拌一体机的重要运行零件介绍下一页：多功能搅拌机控制室位于主机机箱底部

热门产品 / HOT PRODUCT