The mixer tank is made of carbon steel or stainless steel. The optional mixer mainly includes power take-off, front and rear supports of mixing drum, imported reducer, hydraulic system, mixing drum, operating mechanism, cleaning system, etc. The working principle of small concrete mixer is: take out the power of car chassis through power take-off equipment, drive the variable displacement pump of hydraulic system, convert the mechanical energy into hydraulic energy and transfer it to quantitative motor, and then drive the reducer, which drives the mixing equipment to mix the concrete.
Optional end function mixer is a new product which is based on many years of mechanical design, manufacturing and welding experience, fully digesting and absorbing the advanced manufacturing skills of domestic and foreign automatic mixer manufacturers, and passing hundreds of experiments on feeding and discharging speed, discharging rate, mixing power, twisting elasticity and driving function. It is an important part of product concrete transportation Aspiring device.
Mixing drum: the mixing drum used in this model is a widely used structural method. The pear shaped structure is used for the mixing drum. The cleaning water and the mixing water added as needed in the transportation process are injected into the drum from the feed port of the mixing drum head.
Transmission system: the driving method of the mixing drum is to use the engine as the power source, take the power from the power take-off at the rear end of the engine, transfer the power to the variable plunger hydraulic pump through the transmission shaft, drive the mixing drum to rotate through the quantitative plunger oil motor and the reducer.
Mixing drum in and out of the material system (loading and unloading mechanism): is an important equipment to assist the mixing drum work. Operation system: it is the control part of the whole automatic mixing machine. There is an I-shaped slot on the operation panel, which is the activity space of the operating rod. In addition, there is a limited hole on the slot in the back half, which is used to fix the orientation of the operating rod.
The operation system controls the forward, reverse and rotational speed of the mixing cylinder through the left and right operating rods at the rear of the car, so as to complete the feeding and discharging and mixing action.
Water supply system: the water supply system of the mixer is mainly used to clean the mixing equipment. There are two types of water supply system, one is centrifugal pump water supply system, the other is pressure tank water supply system