在夏季使用自动上料搅拌机要注意高温？_公司新闻_新闻资讯_自动搅拌一体车_自动搅拌一体机

站内搜索

新闻资讯

公司新闻行业动态

热点

自动上料平口搅拌机多种方量可供选择

2022-12-23

混凝土自动上料搅拌车的功能有哪些？

2022-12-19

混凝土自动拌料车移动式可自行走户外施工

2022-12-16

自上料搅拌车企业这么多，买车的时候应该看哪方面？

2022-12-12

关于山汽

联系人：刘老师

电话：400-879-1999

公司：山东山汽工程机械（集团）有限公司

地址：山东省莱州市206国道与308省道交叉口东南50米

在夏季使用自动上料搅拌机要注意高温？

所属分类：公司新闻发布时间：2022-11-25 来源：http://www.shanqijituan.cn/ 浏览量：0

自动上料搅拌机高温问题有很大的危害，需要注意，尤其是夏天，很多机器都容易出现高温问题，如何避免自动上料搅拌机高温危害呢？小编总结了以下几点：

The high temperature problem of the automatic feeding mixer is very harmful. It should be noted that, especially in summer, many machines are prone to high temperature problems. How to avoid the high temperature hazard of the automatic feeding mixer? The following points are summarized:

1、防止发动机机体过热：由于环境温度比较高，因此发动机容易过热，要加强对发动机冷却系统的检查、保养，这包括水箱、节温器、水泵、风扇等部件的检查，并且要注意及时加注冷却水。当水温超过100℃时，应在阴凉处停车降温，让发动机怠速运转，并掀开发动机罩帮助散热。

1. Prevent the engine body from overheating: because the ambient temperature is relatively high, the engine is easy to overheat. It is necessary to strengthen the inspection and maintenance of the engine cooling system, including the inspection of water tank, thermostat, water pump, fan and other components, and pay attention to the timely filling of cooling water. When the water temperature exceeds 100 ℃, stop in the shade to cool down, let the engine run at idle speed, and open the engine hood to help heat dissipation.

2、防止车漆受损：车漆经过强烈的阳光曝晒，会发旧、起皱，而普通的美容打蜡虽然可以起到一定的效果，但由于任何车蜡都含有矽的成分，久经紫外线照射会锈蚀车漆，留下点点黑斑。车蜡本身起不到增强硬度、紫外线的作用，反而会因温度过高而很快流失，停车时要注意尽量把车停放在阴凉处。

2. To prevent the paint from being damaged: The car paint will get old and wrinkled after being exposed to strong sunlight. Although ordinary cosmetic waxing can have a certain effect, any car wax contains silicon. After being exposed to ultraviolet light, the car paint will rust, leaving little black spots. The car wax itself does not play a role in enhancing the hardness and ultraviolet light, but it will lose quickly due to high temperature. When parking, you should pay attention to parking the car in a cool place as much as possible.

3、防止车胎爆裂：气温高所以比较容易爆胎，温度过高时很容易使轮胎变形，抗拉力下降。而作为轮胎本身，气压不标准、轮胎老化、性能减弱，或者在行驶过程中轮胎轧到了坚硬的金属或其他硬物等情况，都会导致汽车突然间爆胎。

3. Prevention of tire burst: tire burst is relatively easy due to high temperature, and tire deformation and tensile strength decrease are easy to occur when the temperature is too high. As for the tire itself, non-standard air pressure, aging of the tire, weakened performance, or the tire rolling to hard metal or other hard objects during driving will all lead to sudden tire blowout.

4、防止刹车制动失灵：制动液在高温环境中更容易蒸发汽化，在制动管路中形成气阻，制动蹄片也容易烧蚀，造成制动失灵。所以要经常检查调整制动系统，下长坡途中应注意停车晾刹，保证制动性能良好。如果发现制动毂发烫，应停车降温，但不可浇泼冷水，以防制动毂破裂。

4. Prevent brake failure: the brake fluid is more likely to evaporate and vaporize in the high-temperature environment, forming air resistance in the brake pipeline, and the brake shoe is also easy to be ablated, resulting in brake failure. Therefore, the brake system shall be checked and adjusted frequently. On the way down a long slope, attention shall be paid to parking and braking to ensure good braking performance. If the brake hub is found to be hot, stop to cool down, but do not pour cold water to prevent the brake hub from cracking.

本文由全自动上料搅拌机为您提供，我们的网站是：http://www.shanqijituan.com/我们将以全心全意的热情为您提供服务，欢迎您的访问

This article is provided by the automatic feeding mixer. Our website is: http://www.shanqijituan.com/ We will serve you with wholehearted enthusiasm and welcome your visit

上一页：混凝土自动上料搅拌车的功能有哪些？适用哪些工程？下一页：自动上料搅拌车的定期维护

热门产品 / HOT PRODUCT