1、蓄电池的保养检查:检查蓄电池固定是否牢固。
1. Maintenance and inspection of battery: check whether the battery is firmly fixed.
2、轮胎的检查:每月应在常温下检查一下轮胎气压。
2. Tyre inspection: check the tyre pressure at room temperature every month.
3、离合器总泵液面的检查:离合器液面介于高、低液面间则表示正常,如果低于标准线,则可能是总泵或分泵皮碗损坏。
3. Check the liquid level of the clutch master cylinder: if the liquid level of the clutch is between high and low, it indicates that it is normal. If it is below the standard line, it may be that the master cylinder or slave cylinder cups are damaged.

4、制动液面的检查:制动也在高、低位之间则表示正常。
4. Check the brake fluid level: if the brake fluid level is between high and low, it means that it is normal.
5、混凝土自上料搅拌车发动机冷却液液面检查:混凝土自上料搅拌车发动机在热机状态时,千万不要打开散热器盖,否则可能会被溅出的冷却液或高温蒸气烫伤。等发动机冷却后,检查冷却液的液面应处于满位和低位之间,否则应加蒸馏水或纯净水或冷冻液,加水后的液面高度不能超过满位。如发现短时间内冷却液减少的很快搅拌,自上料搅拌车怎么检修应检查冷却系统是否有泄漏或到维修站去检查混凝土自上料搅拌车。
5. Check the coolant level of the engine of the self feeding concrete mixer truck: Never open the radiator cap when the engine of the self feeding concrete mixer truck is hot, otherwise it may be scalded by the spilled coolant or high temperature steam. After the engine cools down, check that the coolant level should be between full and low, otherwise add distilled water or purified water or refrigerant, and the liquid level after adding water should not exceed full. If it is found that the cooling liquid decreases in a short period of time and is mixed quickly, how to repair the self feeding mixer truck should check whether the cooling system leaks or go to the maintenance station to check the self feeding mixer truck of concrete.
This article is provided for you by the automatic feeding mixer. Our website is: http://www.shanqijituan.com/ We will serve you with wholehearted enthusiasm and welcome your visit