When operating the automatic mixing machine, please apply emergency brake. Since braking is also a learning problem, it is very important to acquire braking skills.
1. Brake downhill
Press squeeze tail system first, then front system. The purpose is to prevent the front of the car from sinking too much, and actively increase the weight of the tail wheel, so as to avoid the tail frame being pushed by the mast.
2. Apply force between toe and sole to apply brake.
It's faster to use the foot brake than to use the foot brake. You can immediately press the entire brake pedal to the bottom to ensure braking capacity. The driving level can be seen from the way people usually brake. When you press the brake, the car stops immediately. Otherwise, it can't stop when the car stops.
3. The passenger brake is stable
When the passenger is sitting in the rear seat, the weight of the head and tail of the car is relatively average, but with the increase of the vehicle weight, the inertia increases, and the braking force required also increases significantly. With the added brakes, the rear seat passengers are not ready for protection and may hit the chair. As long as you teach sitting passengers to sit down, you can solve them.
4. Skillfully use the throttle
In addition to the foot brake, you need to use the throttle to control the speed. To achieve a safe distance, if deceleration is required, the throttle can be released and the foot brake can be correctly installed to facilitate speed control. These are braking technologies. Owners can learn according to their own needs. You need to know not only good driving habits about the car's performance, but also your own safety responsibilities.
5. Lean when you slow down
Adjust speed before rotation: braking, speed changing and pumping. In an emergency, if you suddenly find an obstacle, stop tilting immediately, straighten the door frame of the vehicle, and then brake.
The above is the correct brake technology of automatic mixing machine, I hope the above introduction will help you.