自动搅拌一体车堵料的原因_常见问题_自动搅拌一体车_自动搅拌一体机_多功能搅拌车价格-山东山汽工程机械(集团)有限公司

站内搜索

常见问题

热点

自动上料平口搅拌机多种方量可供选择

2022-12-23

混凝土自动上料搅拌车的功能有哪些？

2022-12-19

混凝土自动拌料车移动式可自行走户外施工

2022-12-16

自上料搅拌车企业这么多，买车的时候应该看哪方面？

2022-12-12

关于山汽

联系人：刘老师

电话：400-879-1999

公司：山东山汽工程机械（集团）有限公司

地址：山东省莱州市206国道与308省道交叉口东南50米

自动搅拌一体车堵料的原因

所属分类：常见问题发布时间：2022-08-03 来源：http://www.shanqijituan.cn/ 浏览量：0

自动上料车堵料的原因

Reasons for blocking of automatic feeding car

在很多狭隘的街道中经常能看到他们工作的身影，但搅拌车长时间不保养，出料口就容易堵料，下面小编就给您科普下堵料的原因。

They can often be seen working in many narrow streets, but if the mixer is not maintained for a long time, it is easy to block the discharge outlet. The following editor will give you the reasons for blocking.

1、上下料时间参数不合理：自动上料机因料仓内无法加装料位机，所以行业基本都有时间控制。如何设置时间参数，上下料时间设置其实很简单，在初次使用时，先设置一个小的时候，然后根据每次吸料位置慢慢加，当达到料位达到吸料口的时间，再减去一秒就是合理时间。放料时间是确保放完料再加一秒。这样做有两个好处：一是料位太高对滤芯伤害特别大，二是每次料都能放干净。

1. Unreasonable loading and unloading time parameters: since the automatic loading machine cannot be equipped with a level machine in the silo, the industry basically has time control. How to set the time parameters? The setting of loading and unloading time is actually very simple. In the first use, set an hour first, and then slowly add it according to the suction position each time. When the time to reach the material level and the suction port is reached, subtract one second to be the reasonable time. The discharging time is to ensure that one second is added after discharging. This has two advantages: one is that the material level is too high, which is particularly harmful to the filter element, and the other is that the material can be put clean every time.

2、自动上料车进料口给料量是否合理：正确的方式是物料在吸料口和空气形成一定的气物混合比，在气流的推动下均匀流入上料机。这个时候我们需要将料枪设计成带有补气功能。如果物料积压时间过长可能很硬，这个时候需要在料枪上装一个振荡器，敲碎结块的物料。

2. Whether the feeding amount at the feeding port of the automatic feeding car is reasonable: the correct way is that the material forms a certain gas material mixture ratio with the air at the suction port, and flows into the feeding machine evenly under the promotion of the air flow. At this time, we need to design the feeding gun with air replenishment function. If the materials are overstocked for a long time, it may be hard. At this time, an oscillator needs to be installed on the material gun to break the caked materials.

以上便是自动搅拌一体车堵料的原因，希望对您有所帮助，如果您有什么问题可以随时咨询我们，我们会给您一个满意的答复。http://www.shanqijituan.cn/

The above is the reason for the blocking of the automatic mixer truck. I hope it can help you. If you have any questions, please feel free to consult us, and we will give you a satisfactory answer. http://www.shanqijituan.cn/

上一页：快来看看多功能的自动上料搅拌车下一页：混凝土自动上料搅拌车的喇叭工作出现问题怎么办？

热门产品 / HOT PRODUCT